JUAS. Dipole Magnet Design for MedAustron MEBT

Published:

Project at a glance

ItemDetails
ApplicationMedAustron MEBT
RoleMechanical engineering / accelerator technology student project
ProgrammeJUAS 2023
ScopeMagnet requirements, electromagnetic design, cooling, fabrication and cost
ToolsFEMM · MATLAB/Octave · analytical calculations

Objective

Develop and evaluate a dipole magnet concept for the Medium Energy Beam Transport section of the MedAustron proton-therapy facility.

The design considered both C6+ ions and protons at the maximum energy considered for the MEBT section.

Engineering requirements

The study addressed:

  • Bending angle and good-field region
  • Magnetic-field quality
  • Vacuum-chamber constraints
  • Current and voltage limits
  • Water-cooling requirements
  • Electromagnetic design
  • Manufacturing approach
  • Capital and operating cost

Design and simulation

The selected concept uses an H-shaped yoke. The study combines analytical calculations with magnetic-field simulation and manual optimisation.

FEMM and Octave magnetic simulation

Representative design results include a magnetic field of approximately 1.19 T for the C6+ case and field quality within the specified good-field region.

Cost and engineering trade-offs

The design study explicitly considered fabrication and lifetime operating costs.

The report estimates approximately €67k in fixed initial tooling/design costs, €101.6k for four magnets, and an overall production and operating estimate of approximately €253.4k under the assumptions described in the report.

These figures are useful examples of how technical design decisions can be evaluated together with manufacturing and lifecycle considerations.

Technical documentation

Download the detailed design report

The report contains the detailed calculations, requirements, simulation results, fabrication considerations and cost estimation.